Panduit Pan-Net TX6A F/UTP Data Cable Cat6A 4 Pair 23AWG Gel Filled HDPE/Polyethylene Black 305M

Panduit Pan-Net TX6A F/UTP Data Cable Cat6A 4 Pair 23AWG Gel Filled HDPE/Polyethylene Black 305M

In stock
SKU
PADPFO6X04BL-CEG
CAT 6A OSP cable shall meet the IEC 61156-5 and ANSI/TIA-568.2-D CAT 6A component Standards. The conductors shall be 23 AWG with foamed polyethylene insulation. The cable shall have a gel-filled construction to prevent moisture migration in underground and wet applications and a wide temperature range for extreme weather environments. The copper conductors shall be twisted in pairs, separated by a pair separator, covered with an overall foil shield and a UV-resistant and abrasion-resistant polyethylene (PE) jacket. Product is to be used in duct and conduit installations only. Not to be used in aerial or direct burial installations.
More Information
Features
  • Bulk packaging: Ensures proper performance and provides quick installation
  • Descending length cable markings: Print legend contains markings from 1000 ft to 0 ft
  • Robust design: Shielding protects against environmental elements that can cause electrical performance failures
  • Flooding compound: Waterproof gel prevents moisture migration and water ingress
Brand Panduit
Standard Pack Size 1
UNSPSC Class 26121600
UOM RL
Vendor Product PFO6X04BL-CEG
Conductor Material Bare copper
Cable Type Cat 6A Shielded F/UTP
Bend Radius 65.6 mm
Conductor Size 23 AWG
Conductor Type Solid
Insulation Material HDPE
Length 305 mtr
Max. Pulling Force 110 N
Outside Diameter 8.2 mm
Pair Count 4
Sheath Colour Black
Sheath Material HDPE
Shielded Type Overall Foil
Temperature 40 to 80 deg C
Voltage 80 Volt

Description

CAT 6A OSP cable shall meet the IEC 61156-5 and ANSI/TIA-568.2-D CAT 6A component Standards. The conductors shall be 23 AWG with foamed polyethylene insulation. The cable shall have a gel-filled construction to prevent moisture migration in underground and wet applications and a wide temperature range for extreme weather environments. The copper conductors shall be twisted in pairs, separated by a pair separator, covered with an overall foil shield and a UV-resistant and abrasion-resistant polyethylene (PE) jacket. Product is to be used in duct and conduit installations only. Not to be used in aerial or direct burial installations.